italiano
english
4-6 Beams control units LN Series
Description
Microprocessor control units for active infrared sensors
- Best solution for double way-in cabins, elevating platforms, anti-theft entrance control system and safety doors.
- Control units in 2 versions to run 4 or 6 interference free synchronized beams. High proofing against opto-electrical interferences.
- Specifically designed for environments with particularly reflecting surfaces and all applications requiring accurate adjustment of the beams.
- The microprocessor calculates the distance and optimizes the set-up of the beams.
- Set up through micro-buttons and pertinent LED indications for the following functions: separate reaction time and sensibility adjustment for every single beam to optimize the operating on safety edges and against special reflections. (In case of continuous applications that need the same setting up continuously, the latter can be reproduced avoiding to repeat each time the same operation with remarkable economic advantages and the employed parameters can be modified – when required), AND function: relay operating by cutting out both beams simultaneously. OR function: relay operating by cutting out at least one beam, 1- 2 beams referring to the same relay.
- Extractable terminal board and connectors placed outside the plastic box for power supply, relay and pre-wired sensor cables.
- IP65 box available on request.
Datasheet LN1056
Models available
| Item | Beams Q.ty | Operating range | Output contact | Consumption | Supply voltage | Sensors compatibility |
|---|---|---|---|---|---|---|
|
LN1054.C
|
1-4
|
0,1-6 mt.
|
5A - 30V DC / 0,9A - 60V DC
|
100 mA
|
10-30V AC/DC
|
PS2003 - PS2007 - PS2010 |
| LN1056.C | 1-6 | 130mA |
Request info for 4-6 Beams control units LN Series